[3] DISASSEMBLY/ASSEMBLY
[3]-1. Center blade (cont.)
ASSEMBLING
ASSEMBLING
Fig. 7
Fig. 8
Dust cover
Insert Pin 7 through
Crank housing complete
from Side blade R side.
Secure Pin 7 with
Stop ring E-4.
Insert Thin washer 7 and Teflon washer 7
into the space between Center blade and
Crank housing complete as illustrated below;
one set each into the both sides of Center blade.
Be sure to place Thin washer 7 on the blade side.
Side blade R
Stop ring E-6
Pin 7
Crank housing
complete
2) Mount the assembled Shearing mechanism on Crank housing complete as illustrated in Figs. 7, 8.
Then assemble Crank housing complete to Gear housing complete. (Refer to Fig. 2.)
Pin 7
Stop ring E-4
[3]-2. Side blades R and L
DISASSEMBLING
Side blade section can be disassembled
as described in Fig. 9.
Do the reverse of the disassembling steps.
Note: Be sure to assemble Spacer between
Slip plate L and Side blade L
as illustrated in Fig.9.
Fig. 9
Side blades R and L can be removed by removing
M5x10 Hex Socket countersunk screw.
M5x10 Hex socket
countersunk screw
Spacer is assembled
between Side blade L
and Slip plate L.
Side blade R
Side blade L
Spacer
Slip plate L
Slip plate R
P
4
/
9
R
epair
Shearing mechanism
Center blade
Fitting Dust cover in this rectangular depression,
assemble Shearing mechanism to Crank housing
complete.
Make sure that Dust cover
is assembled to Center blade
as described in Fig. 5.
Thin washer 7
Teflon washer 7
Center blade
Crank housing
complete