P 2 /10
R
epair
[2] LUBRICATION and ADHESIVE
Lubrication:
Apply Makita grease FA No.2 to the following portions designated with the black triangle to protect
parts and product from unusual abrasion. (Fig. 1)
Adhesive:
When reusing threadlocker coated screws, be sure to apply adhesive before tightening.
Recommended adhesives are Threebond 1342 or Loctite 242.
[1] NECESSARY REPAIRING TOOLS
CAUTION: Remove recipro saw blade and battery cartridge from the machine
for safety before repair/ maintenance !
Fig. 1
Blade clamp section
17
4
Shoulder pin 5
Slider complete
Surface that contacts Needle bearing 708 (Put approx. 9g.)
Pin head that contacts Driving sleeve
2
Gear housing cover complete
Inside surface of the lip portion of Dust seal 14
(Any kind of lubricating grease can be used.)
43
Gear housing
Gear room (Put approx. 9g.)
1R030
Bearing setting pipe 2.5-17.2
Press-fitting Dust seal 14 in Gear housing cover complete
Bearing extractor
Retaining ring S and R pliers
1R269
Removing Ball bearing 6001DDW from the drive-end of Armature
1R291
Removing/installing Retaining ring S-18 from/on Blade clamp section
---
Recipro saw blade
Assembling Pin 3 to Blade clamp section
Code No.
Description
Use for
Item No.
Description
Portion to be lubricate
Dust seal 14
Driving sleeve
17
Needle bearing 708
