Makita BHP441, Instruction Manual

Page: 9 / 60

9
ACCESSORIES
CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita service center.
• Drill bits
• Hammer drill bits
• Screw bits
• Blow-out bulb
• Safety goggles
• Various type of Makita genuine batteries and chargers
• Grip assembly
• Depth rod
• Hook
• Rubber pad assembly
• Wool bonnet
• Foam polishing pad
For Model BHP441
For European countries only
Noise
ENG101-1
The typical A-weighted noise level determined according
to EN60745-2-1:
Sound pressure level (L
pA
): 85 dB (A)
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
Vibration
ENG203-1
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-1:
Work mode: impact drilling into concrete
Vibration emission (a
h,ID
): 10.5 m/s
2
Uncertainty (K): 1.5 m/s
2
ENG302-1
Work mode : drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
or less
For Model BHP451
For European countries only
Noise
ENG102-1
The typical A-weighted noise level determined according
to EN60745-2-1:
Sound pressure level (L
pA
): 86 dB (A)
Sound power level (L
WA
): 97 dB (A)
Uncertainty (K): 3 dB (A)
Wear ear protection
Vibration
ENG203-1
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-1:
Work mode: impact drilling into concrete
Vibration emission (a
h,ID
): 10.0 m/s
2
Uncertainty (K): 2.5 m/s
2
ENG302-1
Work mode : drilling into metal
Vibration emission (a
h,D
): 2.5 m/s
2
or less
EC-DECLARATION OF CONFORMITY
ENH102-5
We declare under our sole responsibility that this product
is in compliance with the following standards of standard-
ized documents;
EN60745, EN55014 in accordance with Council Direc-
tives, 89/336/EEC, 98/37/EC.
CE 2007
Tomoyasu Kato
Director
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND