4
ENGLISH (Original instructions)
Explanation of general view
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star mark
3-1. Switch trigger
4-1. Lamp
5-1. Reversing switch lever
6-1. Speed change lever
7-1. Adjusting ring
7-2. Graduation
7-3. Arrow
8-1. Sleeve
9-1. Groove
9-2. Hook
9-3. Screw
10-1. Bit holder
10-2. Bit
12-1. Limit mark
13-1. Rear cover
13-2. Screw
14-1. Recessed part
14-2. Spring
14-3. Arm
15-1. Carbon brush cap
16-1. Hole
16-2. Carbon brush cap
SPECIFICATIONS
Model BDF446
BDF456
Steel
13 mm
13 mm
Wood
38 mm
38 mm
Wood screw
6 mm x 75 mm
10 mm x 89 mm
Capacities
Machine screw
M6
M6
High (2)
0 - 1,500
0 - 1,500
No load speed (min
-1
)
Low (1)
0 - 400
0 - 400
Overall length
192 mm
192 mm
Net weight
1.7 kg
1.5 kg (with battery BL1815)
1.7 kg (with battery BL1830)
Rated voltage
D.C. 14.4 V
D.C. 18 V
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
ENE034-1
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
) : 71 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode: drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
•
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-14
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Driver Drill
Model No./ Type: BDF446, BDF456
are of series production and
