4
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
END004-4
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
... Read instruction manual.
........ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Intended use
ENE034-1
The tool is intended for drilling and screw driving in wood,
metal and plastic.
General Power Tool Safety
Warnings
GEA010-1
WARNING Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS DRILL SAFETY
WARNINGS
GEB051-2
1.
Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
2.
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring.
Cutting
accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the
operator an electric shock.
3.
Always be sure you have a firm footing. Be sure
no one is below when using the tool in high
locations.
4.
Hold the tool firmly.
5.
Keep hands away from rotating parts.
6.
Do not leave the tool running. Operate the tool
only when hand-held.
1. Battery
cartridge
2. Button
3. Red
part
4. Switch
trigger
5. Lamp
6. Reversing
switch
lever
7. Speed change lever
8. Adjusting
ring
9. Graduations
10. Pointer
11. Sleeve
12. Screw
13. Hook
14. Groove
15. Limit mark
16. Rear cover
17. Screws
18. Spring
19. Arm
20. Recesed part
21. Carbon brush cap
22. Hole
Model
BDF440
BDF450
Capacities
Steel
13 mm
Wood
27 mm
Wood screw
ø 6.8 mm x 50 mm
Machine screw
M6
No load speed (min
-1
)
High (2)
0 - 1,400
Low (1)
0 - 400
Overall length
186 mm
Net weight
1.6 kg
1.7 kg
Rated voltage
D.C. 14.4 V
D.C. 18 V
Cd
Ni-MH
Li-ion
