Makita AF500HP, Instruction Manual, Page: 4 / 64

4
ENGLISH (Original instructions)
Explanation of general view
3-1. Locking position
3-2. Released position
3-3. Lock lever
4-1. Trigger
4-2. Contact element
5-1. Trigger
5-2. Contact element
6-1. Lock lever
7-1. Lock lever
8-1. Adjuster 9-1. Too deep
9-2. Flush
9-3. Too shallow
11-1. Contact top cover
11-2. Hole
11-3. Protrusion
11-4. Nose adapter
13-1. Nose adapter
14-1. Lock lever
14-2. Contact element 15-1. Place first the contact element
against workpiece.
16-1. Hook
16-2. Hex wrench 3
17-1. Driver guide cover
17-2. Screw
17-3. Contact top cover
24-1. Drain cock
SPECIFICATIONS
Model AF500HP
Air pressure 0.98 - 2.26 MPa (9.8 - 22.6 bar)
Nail Iength 15 mm - 50 mm
Nail capacity 100 pcs.
Pneumatic tool oil ISO VG32 or equivalent
Dimensions (L X H X W) 228 mm X 61 mm X 207 mm
Min. hose diameter 5.0 mm or more
Net weight 1.2 kg
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END106-3
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Wear safety glasses.
･
Do not use on scaffoldings, ladders.
ENE073-1
Intended use
The tool is intended for fastening on interior work and
furniture work.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN792:
Sound pressure level (L
pA
) : 80 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG904-2
Vibration
The vibration total value determined according to
EN792:
Vibration emission (a
h
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
•
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).