Makita 9563H, Instruction Manual

Page: 3 / 68

3
ENGLISH (Original instructions)
Explanation of general view
1-1. Shaft lock
2-1. Slide switch
4-1. Wheel guard
4-2. Bearing box
4-3. Screw
5-1. Wheel guard
5-2. Screw
5-3. Bearing box
6-1. Wheel guard 6-2. Bearing box
6-3. Screw
6-4. Lever
7-1. Screw
8-1. Lock nut
8-2. Depressed center grinding
wheel/Multi-disc
8-3. Inner flange
9-1. Lock nut wrench
9-2. Shaft lock
11-1. Lock nut
11-2. Abrasive cut-off wheel/diamond
wheel
11-3. Inner flange
11-4. Wheel guard for abrasive cut-off
wheel/diamond wheel
12-1. Exhaust vent
12-2. Inhalation vent
SPECIFICATIONS
Model 9563H 9564H 9565H
Depressed center wheel diameter 100 mm 115 mm 125 mm
Spindle thread M10 M14 M14
Rated speed (n) / No load speed (n
0
) 11,000 min
-1
11,000 min
-1
11,000 min
-1
Overall length 299 mm 299 mm 299 mm
Net weight 2.1 kg 2.3 kg 2.3 kg
Safety class /II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE048-1
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Model 9563H
Sound pressure level (L
pA
) : 85 dB(A)
Sound power level (L
WA
) : 96 dB(A)
Uncertainty (K) : 3 dB(A)
Model 9564H,9565H
Sound pressure level (L
pA
) : 84 dB(A)
Sound power level (L
WA
) : 95 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model 9563H
Work mode : surface grinding
Vibration emission (a
h,AG
) : 5.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
If the tool is used for other applications, the vibration
values may be different.
Model 9564H
Work mode : surface grinding
Vibration emission (a
h,AG
) : 8.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
If the tool is used for other applications, the vibration
values may be different.
Work mode : surface grinding with vibration proof
grip
Vibration emission (a
h,AG
) : 8.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model 9565H
Work mode : surface grinding
Vibration emission (a
h,AG
) : 9.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
If the tool is used for other applications, the vibration
values may be different.