< 1 > Removing gear housing complete from base
Gear housing can be removed from base by loosening
pan hd. screw M5 and cap square bolt M6x90.
See Fig.1
(Note) Pay attention not to lose hex nut M5-8 when
removing gear housing.
< 2 > Removing and assembling safety cover
See Fig.2.
Base
Hex nut M5-8
Cap square bolt M6x90
Pan hd. screw M5
Gear housing
2
4
5
6
7
8
9
10
3
1
11
1. Hex socket Hd.bolt M6x20
2. Outer flange 40
3. Tipped saw blade
4. Inner flange 40
5.Cup washer (Pay attention to the direction of cup washer)
6. Retaining ring S-38
7. Spacer
8. Safety cover
9.Thickness ring (Thickness ring has to be installed between 10.spacer and 12.bearing box.)
10. Spacer
11.Spindle
12.Bearing box
The concave section has to
be faced to safety cover side
as per the above illustration.
Safety cover side
5
12
(Spacer has to be inserted into the safety cover fully. Otherwise safety cover can not move.)
(Spacer has to be inserted into the safety cover fully. Otherwise safety cover can not move.)
Fig.2
Fig.1
R
epair