P
6
/
9
2. Remove M6x12 Hex socket
head bolt, Spring washer 6
and M6 Hex nut from the
hole near the hinge.
3. Lift up the motor section until Safety
cover touches Spark guard.
Note
: Do not remove Spark guard in this
step because this guard
functions as a
stopper for avoiding accidental popping
of Compression spring 45.
4. While holding the base section with your knees, push Spring
holder by both hands toward Spring room of Gear housing.
Spring holder is now removed from M10 Hex bolt.
M6x12 Hex socket
head bolt
Chain
Spring washer 6
(1) Compression spring 45 is removed as drawn in
Fig. 9
.
M6 Hex nut
Spark guard
Spring
holder
5. Remove Spring holder and Compression
spring 45 from the spring room of Gear
housing.
M10 Hex bolt
Compression
spring 45
Fig. 9
Spring
holder
M10 Hex bolt
Compression
spring 45
Spring holder
Compression
spring 45
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Vise Section (cont.)
Fig. 8
ASSEMBLING
Assemble by reversing the Disassembly procedure. (Refer to
Fig. 7)
Note
: Align the ring of Chain to the square projection of Screw guide when securing Chain with M8x30 Pan head screw.
(
Fig. 8)
Square projection on Screw guide
M8x30 Pan head screw
Ring of Chain
[3]-4. Base
DISASSEMBLING
1. Secure the motor section
to hook Chain on Hanger
at the rear side of Handle.
