MAKINEX MCP-6-SS, Operator'S Manual

Page: 5 / 23

MCP-6-SS
– User Manual
Page 3 of 21
SAFETY INFORMATION
GENERAL SAFETY INFORMATION
WARNING
Read this manual thoroughly before using your MCP. Failure to
follow instructions could result in serious injury or death
.
WARNING
Instruct operators in care and use of the product before use!
WARNING
Keep children away from MCP at all times.

ALWAYS ensure the applied load does not exceed the rating of the installed breaker.

ALWAYS disconnect the MCP from mains when carrying out any maintenance.

ALWAYS plug in the MCP BEFORE applying loads.

ALWAYS test the
RCBO’s before use.

ALWAYS check the MCP electrical leads for damage before use.

ALWAYS position electrical leads so that they will NOT create a tripping hazard.

NEVER allow children or animals near the MCP.

NEVER alter or tamper with the internal wiring of the MCP.

NEVER operate in wet conditions.

NEVER climb or stand on the MCP.
MCP POSITIONING FOR SAFE USE

ALWAYS leave at least a 400 mm gap between the front of the MCP door to any
surrounding building or structure to allow the doors to open.

ALWAYS ensure the MCP is on a solid, flat surface.

ALWAYS ensure the surrounding area is free from anything that could burn or
damage the MCP.

ALWAYS activate the brakes when MCP is in position.

NEVER tilt the MCP.

NEVER attempt to lift or move the MCP without the assistance of other persons or
suitable lifting equipment.