MAKINEX MCP-6-SS, Operator'S Manual

Page: 3 / 23

MCP-6-SS
– User Manual
Page 1 of 21
INTRODUCTION
Thank you for purchasing a MAKINEX product.
This manual provides information and procedures to safely operate and maintain the
MCP-6-SS Mobile Charge Pod. For your own safety and protection from injury,
carefully read, understand, and observe the safety instructions described in this
manual.
Keep this manual or a copy of it with the product. If you lose this manual or need an
additional copy, please contact MAKINEX. This product is designed and built with user
safety in mind; however, it can present hazards if improperly operated and serviced. If
there are any questions regarding operating or servicing of this product, please contact
MAKINEX.
All rights, especially copying and distribution rights are reserved.
Copyright 2019 by MAKINEX.
No part of this publication may be reproduced in any form or by any means, electronic
or mechanical, including photocopying, without express written permission from
MAKINEX.
Any type of reproduction or distribution not authorised by MAKINEX represents an
infringement of valid copyrights and will be prosecuted. We expressly reserve the right
to make technical modifications, even without due notice, which aim at improving our
products or their safety standards.
DISCLAIMER
MAKINEX and its affiliates take no responsibility for any damage, injury or death
resulting from the incorrect or unsafe use of this product. Use of this product should be
undertaken by competent persons only. It is the operator’s responsibility to ensure that
the following safety procedures are followed. If you are unsure, do not operate this
product.
Record the model and serial numbers as well as date and place of purchase for
future reference. Have this information available when ordering parts and when making
technical or warranty inquiries.
MAKINEX SUPPORT
Refer to contact details on pg. 18
MODEL NO.
MCP-6-SS
SERIAL NO.
DATE OF PURCHASE
PURCHASE LOCATION