7.
Assemble R & L ABS propeller according to corresponding position of motors.
(Remark: please note direction of drone tail )
8.
Insert battery into battery cover according to socket direction.
9.
Assemble paintable cover to carbon fiber frame
10.
Fix sponge on the battery cover by double-sided adhesive tape
(Remark: please don’t glue on the metal barometer)
Part 3: Remote controller frequency pairing operation
1.
Open remote controller, push right joystick into top right corner, press button K1
for 1S to 2S, then three light (white/blue/red) will be at twinkling status.
2.
Open drone power switch, please play attention to blue light’s twinkling status
and twink two times more than other red/white light. it prove frequency pairing
success.
3.
Restart remote controller.
