Part 2: Assembly process
1.
Assemble bumper
2.
Insert motor into Self-lock motor base, please note power line should through
motor low side.
3.
Flight controller power connector should be superimposed with battery bulge part,
and use cross screwdriver to fix battery compartment by 4pcs self-tapping screws.
4.
Use screws and nuts to fix flight controller and carbon fiber frame.
(Remark: please note that correspondence between flight controller and carbon
fiber frame)
5.
Use motor through round hole of carbon fiber frame and make motor cover
locked with self-lock motor base. Please note position and color of motors.
6.
Use screws and nuts to fix propeller protection cover, as picture 6.
