2
MakerBot Replicator
MakerBot
2
MakerBot Replicator Z18
MakerBot
Step 2 - Remove Front Door
Remove six (6) screws inside door
using a Phillips screwdriver
Remove
Steel Door Frame
and
Acrylic Window
by pushing it out
of the frame.
Step 1 - Remove the Outer
Panel Assembly
four (4) flat head screws using a
2.5mm hex driver
Remove the following screws:
from the
Outer Panel Assembly
Once the screws are removed
gently pull the
Outer Panel
Assembly
back and away from
the body of the Z18
Grab spine of Door Frame and
bend towards and pull to detach
from slot.Pin
and remove Door
Assembly
NOTE: Only follow these steps if
your
Dowel Hinge Pin
is glued to
the
Front Door frame
. If its not
glued just remove
Dowel Hinge
•
•
•
•
•
•
