MakerBot Replicator 2X, Troubleshooting And Maintenance

Page: 15 / 40

MISALIGNED NOZZLES
CONTINUED
15 TROUBLESHOOTING
5. Look closely at your test print. First look at
the set of lines to the left (the lines that are
parallel to the front of the build plate). Notice
that the first lines on the left are farther from
the front of the build plate than the first lines
on the right. Examine the lines and find the
pair of lines that match best. The best match
will look the most like a single continuous line,
with both test lines perfectly centered. Note
the number. This is the best line for the Y axis.
6. Look at the set of lines to the right (the
lines that are perpendicular to the front of the
build plate). Examine the lines and find the
pair that match best. The best match will look
the most like a single continuous line, with
both test lines perfectly centered. Note the
number. This is the best line for the X axis.
7. The LCD menu will prompt you to enter the
line number that is best for the X axis and the
line number that is best for the Y axis.
8. Use the arrow buttons to select a line
number and the M button to select a line
number. The MakerBot Replicator 2X will
store this information about the locations of
the extruder nozzles and use them to make
future prints align better.