STEP NINE:
Reattach the Experimental
Extruder to the 3D printer’s
carriage and run the Z-Calibrate
function. You are now ready
to load you 1.75 mm diameter
filament of choice
and print.
STEP EIGHT:
Heat the Experimental Extruder
on your 3D printer using the
Preheat function, then place the
Experimental Extruder back into
the Experimental Extruder Jig and
wrench tighten the Nozzle one
additional 40° turn.
PAGE 5
EXPERIMENTAL EXTRUDER CONFIGURATION AND NOZZLE CHANGING GUIDE
For additional resources and
up-to-date inf
or
mation, visit
Summary of Contents for Labs Experimental Extruder
Page 6: ......
