4. Assemble both roller bearing carriages by inserting the shoulder bolt through larger
carriage hole, then through a washer, the
ring bearing
, another washer, and out though
the smaller side of the roller bearing carriage. Use the largest
(5mm) hex wrench
on one
end and 13mm combo wrench (or any
wrench
) on the other to tighten.
5. Remove the protective plastic on each side of the
acrylic dust cover
. Then place it over
the dust collection slot.
Drew’s Note: The sled assembly is done! Place it aside and we’ll come back to it in step 14.
6. Attach the Z motor (removed from your Maslow) to the
Z motor bracket
. Align the
motor shaft in the slot closest to the end of the bracket. Use the small
black bolts
and the
2mm hex wrench
.
Shoulder
bolt
Ring
bearing
Washer
Washer
Nut
TOP VIEW
SIDE VIEW
Assembly Tools
Bag I
Z Axis
Bag C
Z motor bracket
Acrylic dust cover
8
