background image

APPENDIX 1 - TIPS

The  MakerMade M2  CNC kit is used to assemble a large format CNC machine. It is 
designed to use a router (or another tool) to cut 4ft by 8ft sheet materials. When 
used correctly, this machine is very safe. However, some safety precautions must 
be taken to prevent injury. These include but are not limited to :

•  Always follow the safety guidelines and instructions included with the router 

or other tool you attach to the kit.

•  Always wear ear and eye protection when running your machine.

•  Use adequate dust collection or wear a respirator. Breathing material dust can 

be harmful.

•  Use proper lifting techniques when loading/unloading materials.

•  Always use caution when connecting/removing the sled. This assembly weighs 

around 20 lbs.

•  NEVER leave your machine running unattended! 

•  Optionally, you can cut off the ends of the beams and the top of the vertical 

frame legs outside of the stud mounts, so your frame isn’t as tall or long. 

We’re excited to have you in our community of makers and can’t wait to see what 
you create. 

Find us on 

 Facebook 

 Instagram 

 and 

 YouTube  

 @makermadecnc  and tag your 

projects! 

#MakerMadeMaker

Click here to check out updates on our FAQ section!

16

Summary of Contents for M2 CNC





















Reviews: