30
Now connect the cable to the robot board. The colours are combined in the plugs to 3
wires each.
From left (MicroSD card holder position) to right (battery plug position):
White, grey, purple -> White points to outer edge of board
Blue, green, yellow -> Blue points to the outer edge of the board
Orange, red brown -> Orange points to the outer edge of the board
Figure 45b shows a detail enlargement of Figure 45a.
Figure 45b
Figure 45a
Summary of Contents for 1664151
