MAKELSAN 1K User Manual Download Page 1

-1-

MAKELSAN UPS

1  BRIEF INTRODUCTION

1.1 Prolegomenon

The product is designed specially aiming at the requirement of MINI and MICRO

level computer with exquisite quality and excellent function, easy to operate. With the

development of customer office automatism and computerism, considering the bulk and

the position of positing space, the noise disturbance to personnel in office, the light,

thin, short and small product is our design direction, and we stress low noise. So this

product is optimum supply power partner for office and makes you can attain optimal

clean power quality.

1.2 Five design points

1. Small bulk and no occupation space

2. Light weight and convenience to transit

3. Beauty and nature, easy to install

4. Convenient to maintain and easy to operate

5. Package material with environment protection and no pollution to environment

1.3 Note

The manual makes you can operate and maintain the system easily. To normally exert

all functions of the system, please note the following:

1. Read the manual carefully before use

2. Perform the operation strictly according to operating process

3. Place the equipment carefully and lightly when moving the equipment

4. Install the power according to illumination in the manual

5. Please do not open the cover to avoid injury caused by electrical shock

6. Please charge batteries once every a period if no used for long time

7. Do not use UPS on the condition of overload to avoid UPS fault

8. Please carefully keep the manual for the future reference

9. Please handle the system according to "ABNORMITY HANDLING PROCESS" if

there presents any abnormal phenomenon in machine.

10. Please keep UPS neatness and cleanness

BRIEF INTRODUCTION

Summary of Contents for 1K




































Reviews: