4 Detailed Functions Description
4.2.2 O
[x]
: Measurements
The usage of this functionality makes available the following COs:
[input]
“Reset Working Time counter”
: Sending “True” resets the counter;
[output]
“Working t. limit reached Ind.”
: Sends “True” when the counter
reaches the defined limit;
[output]
“Working Time counter Ind.”
: Gives the counter every hour or by
reading (the counter is in seconds);
When the channel is set to “Lighting” function it is possible to measure the amount of working time of
each of the channels. Additionally it's possible to make the device issue a message whenever a certain
channel reaches a certain amount of working time. This can be useful, for example, for getting warning
that a lamp/group of lamps is reaching its end of life. The configuration page is like the one presented in
Figure 7. The respective detailed descriptions are presented in Table 5.
User’s Manual
Page 25
Figure 6: Time Limited Jamming example with "Theoretical Status without jamming" and
"Delayed On" function.
