Introduction to product
mBot interactive light & sound pack is a 3-in-1 add-on pack. With the parts in the pack,
you can build out three robots based on mBot : “light chasing robot”, “intelligent desk
light” and “scorpion robot”.
Light chasing robot:
It detects the light intensity around mBot via
two light sensors on each side. When the light
intensity on the left side is greater than that on
the right side, the robot will turn left; when the
light intensity on the right side is greater than
that on the left side, the robot will turn right;
otherwise, the robot will go straight.
Intelligent desk light:
By changing the building configuration, mBot
can turn into an “intelligent desk light”. The
light has two operating modes: touch mode in
which the light brightness can be regulated by
touching the line follower sensor with fingers,
and voice control mode, in which the sound
intensity in the surrounding area has to be
sensed, and when the intensity is large, the light
will come on, like the voice-activated light at the
stairway in our daily life.
Scorpion robot:
Add mBot with a vivid “tail”, enabling it to look
like a scorpion. In this case, by adding an arc tail
at the rear part of mBot, the center of gravity of
the robot is changed, thus making it easier for
the mBot to raise its head.
Mak
eblock
Makeblock
Makeblock
2
Summary of Contents for mBot
