Make Noise Strega, Manual

Page: 16 / 39

16
Panel controls, Inputs and Outputs
Time/ Filter Experiment (cont.): in these circuits the external substances are combined with the Strega Tones
and
1. Blend CV In: Direct Coupled, uni-polar CV Input for Blend, range 0VDC to 5VDC.
2. Blend Combo Control: allows for recombining the original external substances and Strega Tones with the results
of the Time/ Filter experiment. With nothing patched to Blend CV In, operates as panel control for Blend. With
signal patched to Bland CV In, operates as unipolar attenuator for that signal setting amount of control that
signal has over the Blend.
3. Filter: removes unwanted substances from the results of Time/ Filter experiment. At Full CW all substances are
passed through to be Decayed. At Full CCW almost no substances will be passed through to be Decayed.
4. Filter CV Attenuvertor: bi-polar attenuator for the Filter CV In.
5. Filter CV In: Direct Coupled, bi-polar CV Input for Filter, range +/- 10VDC.
6. Absorb CV In: Direct Coupled, uni-polar CV Input for Filter, range 0VDC to 10VDC.
7. Absorb Combo Control: determines how much of the Filtered substances will be absorbed and therefore
diminished into the earth and how much will be presented for blending. With nothing patched to Absorb CV In,
operates as panel control for Absorb. With signal patched to Absorb CV In, operates as unipolar attenuator for
that signal, setting amount of control that signal has over the Absorb process.