Make Noise Strega, Manual

Page: 11 / 39

11
Panel controls, Inputs and Outputs
External Signal Addition: Should your experiment require audio substances not contained within the Strega, you
may add them using these circuits.
1. External Substance In: AC coupled Mono TS mini jack input. Signals ranging from Modular Level to Line Level .
2. Strength Out: the external signal as processed by the Strength circuit. Maximum signal level is quite large and
dependent upon amplitude of signal patched to External In. Max levels 20Vpp. Typical Signal level is Modular,
10Vpp.
3. Strength Control: Sets amount of gain applied to Signal patched to External In. From Unity Gain at Full CCW to
Maximal Gain at Full CW , for Line Level signals .
4. External Constant Control: Sets how much of the Signal from the Strength Out is added to the Time/ Filter
experiment. Use this to blend External Substances with Strega Tones.
Control Sources and Modulation Sources: these sources may be patched to any destination in the Strega to
influence, control or agitate the experiment.
5. CV 1: DC Voltage representation of the of External In as processed by the Strength circuit. 0 to 10VDC.
6. CV 2: DC Voltage Feedback signal from the Time/ Filter circuit. Range +/-5VDC