7
1
3
5
5
7
9
16 17 18
2
6
7
8
9
10
11
12
13
14 15
19 20 21
28
27
26
25
24
23
22
4
PHONOGENE Panel Controls
1. Signal Input Rotary Level Control: For Line Level set at 3:00, and for 10Vpp at set 9:00 CW. Faceplate is marked accordingly.
2. Signal Input: Line Level or typical Modular Synth levels acceptable. AC Coupled.
3. Sound On Sound CV Input: sets mix of previously recorded Loop with Live Signal input when recording, to allow for Sound on
Sound type “overdubs.” Also allows for setting monitoring level of Live input signals with previously recorded Loop. May
be misused as a Voltage Controlled Crossfader (between Live and Loop) or VCA for\ Loop (no Live Signal). Range 0V to
10V, linear response. Normalized to +10V.
4. Sound On Sound Panel Control: with nothing patched to SOS CV Input (which is normalized to +10V) works as standard panel
control. With Signal Patched to SOS CV Input, works as attenuator for that signal.
5. Signal Output: 10Vpp (depending upon Signal Input attenuator setting and source material), AC coupled.
6 & 7. Vari-Speed and Splice Indicator LEDs: These LEDs tell user in which direction the PHONOGENE is playing. The LEFT Blue (7)
LED indicates reverse playback, right Orange LED (6) indicates forward playback. When no LEDs are lighted, playback is
stopped.
PHONOGENE Panel Controls
Summary of Contents for PHONOGENE
Page 1: ...PHONOGENE v2 7...
