MAKE MENDEL
Page 11
Assemble Bottom Plate :
1) Attach the Circuit board (Printrboard) at the bottom of the bottom-Plate, using Plastic
Ties.
2) Attach two Z motors at the Bottom plate.
3) Use Z Prusa cable to connect two Z motors, whose one end will go to Printrboard.
Z Mechanical Switch Assembly
1) Using Acrylic part and Screws (M2.5 x 25) given place the mechanical switch at the Side plate.
2) Assemble M4 Nylock, M4x40 Screw, Soft Spring, Mudguard Washer and place above the
Mechanical switch to limit the switch.
