Page 7
© 2012 Maka Technologies Group. All Rights Reserved.
2 Alexandra Road #02-03
Delta House
Singapore 159919
Tel:6276 0899 Fax: 6270 7123
Visit our website at: www.makagps.com
Note: A new battery will reach its best performance after number cycles of charging and discharging.
If the device is not used for long time, it is better to charge it to full capacity every 2 or 3 months during storage.
Charger Application:
AC Charger (Not included in the package):
Take out the AC charger, plug it into the wall outlet with AC 220V(100V~240V), then plug in the AC jack into the
device AC-in jack.(see the illustration below).
Car Lighter Charger:
Please insert the car charger into car cigarette lighter jack, then plug into the USB jack(see the illustration below).
Note: When you use car charger, please start car engine first, then connect it to the device to avoid possible
damage to the device due to overloaded pulse current during ignition. Please pull it out when you stop the engine,
and plug it in again after next ignition.
Power On/Off the device
In power off status, slide the power switch to "ON" position to turn on the device, then the OSD will be displayed
on screen.
Sleeping & Power
–off
In power-on mode, press the power button on the device for 3-5 seconds then the sleeping mode or confirmation
for power-off screen will display as follows:
20
The clevice w
ill be pow
er off in
s
In this UI click the button
will be in sleeping mode
Click the button
will power off
Click the button
to exit the UI and back to normal operation.
