Page 20
© 2012 Maka Technologies Group. All Rights Reserved.
2 Alexandra Road #02-03
Delta House
Singapore 159919
Tel:6276 0899 Fax: 6270 7123
Visit our website at: www.makagps.com
Creating a Note
At Notepad function, click the
button to enter the state of adding notes as shown in the diagram below.
The screen shows the soft keyboard when it is in input state. As shown in the picture, you can choose the input
method from the last button at the bottom.
Click "Handwrite" to change to the handwriting input state
Click "Hide" to close the small keyboard.
The handwriting input state is shown as follows:
As shown in the picture, the middle empty area is the handwriting area.
Click the button on the right side to change the input method
Click "Hide" to close the handwriting input panel
Click "keyboard" to return to keyboard input state
Enter the content to be saved, hide the soft keypad
Click the
button in the lower part of the screen to save the entered content and return to the main
interface of the Notepad function.
Edit/modify Notes Saved
At Notepad function, select the note to be modified
Click the
button in the lower part of the screen to enter the note editing state. The screen display and
operation are all the same as “Creating a Note”.
After the modification, click the
button to save it, and return to previous interface of the Notepad
function.
Deleting a Note
At Notepad function, select the note to be deleted
Click the
button in the lower part of the screen.
