MAK AL-2016A, User Manual

Page: 6 / 18

6
5) Built-in DIP Sw itch
：
AL-2016A
NO. Function Setting
1
ON ON
Remotely Control by phone (Def ault is “ON”)
1 OFF
2
ON ON
Switch for restoring password (Def ault is “2”), when forgot
password, please open the cov er of mainframe, pull the
switch from “2” to “ON”, then power off, power on after
2sec., pull it to be “2” again. Password restored to be
“000000”
2 OFF
3
ON ON
Arm/Disarm dial CMS or not (Def ault is “3”). If pull to “ON”
and input CMS No. & User ID, it will dial CMS, when
Arm/Disarm. Pull to “3”, it will not dial CMS when
Arm/Disarm.
3 OFF
4 Undefined
AL-2016A GSM
NO. Function Setting
1
ON ON
Switch f or restoring password(Def ault is “1”), when
f orgot password, please open the cover of mainf rame,
pull the switch f rom “1” to “ON”, then power off, power
on after 2sec., pull it to be “1” again. Password restored
to be “000000”
1 OFF
2
ON ON
Sending SMS & dial CMS or not, when Arm/Disarm
(Def ault is “2”). If pull to “ON” and input CMS No., it will
dial CMS. If no input CMS No., it will send SMS to user.
2 OFF
6) Remote Control
OR
Button Enable/Disable Function
ARM KEY
Press key
Sound “Bi”, enter normal ARM
status.
To be
Armed
Press key again
Sound “Bi Bi”, enter mute ARM
status.
DISARM
KEY
Press key
Disarm immediately & exit
alarming status
To be
Disarmed
EMERGENCY
KEY
Press key
Warn & Dial at once
To be
Emergency
PERIMETER
ARM KEY
Press key
Sound “Bi”, enter perimeter
Armed
To be
Perimeter
Armed
Press & key at
the same time
Enter v ocal armed status without
any delay.