DMX Operation
This is the operating mode which will allow for control with an external DMX controller. You must set the
starting address for this mode. If this is your first time using DMX, then it is recommended that you refer to
the ―DMX Primer‖ section in the ―Appendix‖ of this manual.
Standalone Operation
Automatic Fast
Automatic Slow
Sound-Active
4.Operating Instructions
13
This fixture has preprogrammed fast chases. These are accessed via the control panel. Please see the
Instructions. Below for further explanation.
1.
Press<MENU>,using<UP>and<DOWN>select until <INSET>appears on the LCD
screen
2.
Press<ENTER>
3.
Select<AUTOFAT>
4.
Press<ENTER>
This fixture has preprogrammed slow chases. These are accessed via the control panel. Please see the
Instructions. Below for further explanation.
1.
Press<MENU>,using<UP>and<DOWN>select until <INSET>appears on the LCD
screen
2.
Press<ENTER>
3.
Select<AUTOSLOW>
4.
Press<ENTER>
This fixture has preprogrammed sound triggered chases. These are accessed via the control panel.
Please see the Instructions. Below for further explanation.
1.
Press<MENU>,using<UP>and<DOWN>select until <INSET>appears on the LCD
screen
2.
Press<ENTER>
3.
Select<SOUND>
4.
Press<ENTER>
1.
Press<MENU>,using<UP>and<DOWN>select until<ADRESS>appears on the LCD screen;
2.
Press<ENTER>;;
3.
Using Value Button<UP>and Digit Button<DOWN>select DMX DATA<001
—512>;
4.
Press<ENTER>
