MAJORITY SCAFELL PIKE SKP-BAR-BLK, Instruction Manual

Page: 8 / 20

6
Wall Mounting
Safety
Use the RCA Stereo Audio Cable to connect the TV’s stereo
RCA(L/R). Audio output socket to the AUX(L/R) Sockets of the
unit.
Then press the AUX button on the remote control or press the
source button on the unit to choose the AUX function.
Turn on your television set to use the Majority Scafell Pike.
Fixing the Soundbar
1/. Installation must be carried out by qualified personnel only.
Incorrect assembly can result in severe personal injury and property
damage. If you are going to install this Soundbar yourself, you must
have studied installations, such as electrical wiring and plumbing that
may be buried inside the wall. It is installer's responsibility to verify that
the wall safely support the total load of the Soundbar.
2/. Additional tools (not included) are required for the installation.
3/. Do not over-tighten screws.
4/. Keep this user manual for future reference.
5/. Use an electric stud finder to check the wall type before drilling and
mounting.
Tools & fixings required
1/. Drill fitted with masonry drill bit
3/. Pencil
5/. Spirit level 2/. Screwdriver
4/. Ruler
Place the soundbar in the desired position and using a spirit level
check that the soundbar is level.
Make a light pencil mark on the wall at the top edge of both fixing
brackets. The mark should be positioned directly above each bracket.
Note the mounting points on the soundbar (one is 160mm from the
end while the other is 160mm from the other end),so you should use
the soundbar as a template to get the right mounting positions.
Place the soundbar away from the work area and then mark two
fixing points 7mm below the light pencil marks for the screws. These
marks should be 470mm apart and level. Before drilling, use a spirit
level to check that the fixing points marked are level.