Instructions Guide
4
Standby
To change the music system back into standby, press and hold the
‘Standby/Mode’ button
(Ref .3)
. To turn off fully, switch the button
on top of the unit
(Ref .1)
to Off .
DAB
/DAB+
Radio
Press the ‘Standby/Mode’ button
(Ref .3)
. On first use DAB Radio will
automatically start scanning all stations and save them .
To auto scan (if the unit hasn’t automatically done so, or shows no
signal) press and hold the ‘Info/Menu’ button
(Ref .9)
and when the
display shows “FULL SCAN”, press the ‘Enter’ button
(Ref .7)
.
The unit will start scanning up the frequency band and store all
stations that have a good signal . Please note: if you are not in a
good DAB signal area then you won’t get a strong signal, if any .
The radio will automatically save all those stations that have a
strong signal . After searching has finished it will automatically play
the first station stored .
To listen to any of the stations that have been stored, use the ‘Next’
(Ref .8)
and ‘Prev’
(Ref .5)
buttons to navigate through the stations .
The radio will display station information when you press the ‘Info/
Menu’ button
(Ref .9)
. Press multiple times to view all information
available (See page 8) .
When you turn the radio on again after switching it off, it will
automatically tune to the same station (DAB or FM) that was last
selected .
