Instructions Guide
3
Please note all
(Ref.)
refer to the
Controls and Functions
mapping guide on Page 1 .
Basic Operation
Switch the ‘ON/OFF’
(Ref .1)
button on top of the system to ‘ON’ .
“Welcome to Digital Radio” will show on the display . Then it will
show the clock .
Ensure the system has been charged, the battery life will show on
the display when you turn on . If the battery icon shows all of the
bars illuminated then the system is fully charged .
To charge the device, use the USB cable provided and plug it into a
computer or a plug (not supplied) that accepts USB connectors .
Press the ‘Standby/Mode’ button to turn on the unit
(Ref .3)
. The
system should go straight to DAB Radio and automatically start
scanning for stations . The display will show “Searching” and can
take a few minutes to scan .
Press the ‘Standby/Mode’ button
(Ref .3)
to switch to FM or again to
switch back to DAB .
Ensure that the earphones are connected into the top of the
system correctly
(Ref .2)
as they are also the antenna of your radio .
Without them, no DAB/FM signal will be received .
