11
Instructions Guide
FM Radio
Press the ‘Power/Mode’ button (
Ref.4
) to switch to FM Radio. The
first time you do this, FM frequency “87.50MHz” will be displayed
on the screen.
Ensure that the antenna is fully extended so that the best signal
is being received for the radio scan (
Ref.3
).
To auto scan up the bandwidth, press and release the ‘Scan’
button (
Ref.6
). This will start scanning up the frequency band
and save available stations. The first available station with strong
signal will begin to play.
To fine tune or search for stations, use the ‘Skip Back’ or ‘Skip
Forward’ buttons (
Ref.11
/13
). You can press and release these
buttons multiple times to browse through slowly, or press and
hold
the buttons to search quickly.
Press down the ‘Volume/Select’ dial to switch between Mono
and Auto. Mono will play the same through both speakers and
Auto will offer a better stereo sound.
When you turn the radio on again after it switching off, it will
automatically tune to the same station (DAB or FM) that was last
selected.
When listening to a FM station, you can view information about
the station by pressing the ‘Menu’ button (
Ref.5
).
Summary of Contents for Castle CB3A-CDAB-BLK
Page 1: ...CB3A CDAB BLK CASTLE Instructions Guide Compact Music System...
Page 28: ......
Page 29: ...www majorityradios co uk...
