DAB Radio Mode & Time and Date
DAB Radio
Press the ‘Standby/Mode’ button (
Ref.3
). On first use DAB Radio
will automatically start scanning all stations and save them.
To auto scan (if it hasn’t automatically or shows no signal) press
and
hold
the ‘Info/Menu/Stop’ button (
Ref.9
) and when the
display shows “FULL SCAN”, press the ‘Enter/Play/Pause’ button
(
Ref.7
).
It will start scanning up the frequency band and store all stations
that have a good signal. Please note, if you are not in a good DAB
signal area then you won’t get a strong signal, if any.
The radio will automatically save all the stations with a strong
signal.
After searching has finished it will automatically play the first
station stored.
To listen to any of the stations that have been stored, use the ‘Next’
(
Ref.8
) and ‘Prev’ (
Ref.5
) buttons to navigate through the stations.
The radio will display station information when you press the
‘Info/Menu/Stop’ button (
Ref.9
). Press multiple times to view all
information available. See page 9.
When you turn the radio on again after switching it off, it will
automatically tune to the same station (DAB or FM) that was last
selected.
Time and Date
On first use of DAB Radio, the time and date will automatically
update.
Instructions Guide
4
