Major SWIFT MJ71-190FM, Operator'S Manual & Parts List

Page: 20 / 89

www.major-equipment.com
16
SWIFT 270 WING
SR
13/02/2018
Drawn Date
2 / 3
Rev. Sheet Drawing No. Title Scale
0
Quantity
REF DRWG
ROLLER-SCRAPER-ASSY
Stock Code:
Material:
10 FAB
20 WELD
40 PAINT G
42 PAINT Y
45 GALV
47 PLATE C
48 PLATE Z
50 ASSY
52 1FIX
55 2FIX
FAB
FIMP
MCD
PU
IMP
www.major-equipment.com
Ve
nd
or
Fi
ni
sh
MAJOR
THE INFORMATION CONTAINED IN THIS DRAWING IS THE PROPERTY
OF MAJOR EQUIPMENT INTL. LTD.
ANY REPRODUCTION IN PART OR A WHOLE WITHOUT THE WRITTEN
PERMISSION OF MAJOR EQUIPMENT INTL. LTD. IS PROHIBITED.
LAS
LASF
PLA
PLAF
IF IN DOUBT ASK
FAB
Vendor:
Route:
Ro
ut
e
Finish:
PLATE Z
PLATE C
GALV
SELF
PAINT G
PAINT Y
GALVP G
WELD
VIEW USED IN MANUAL.
1
3
B
D
A
A
B
C
C
D
4
5
5
2
C
Roller and Castor wheels adjustment
In order to achieve desired cutting height, castor wheels and roller should be adjusted.
Castor wheels (optional)
To adjust the height of front wheels lift up the
machine and:
1. Unscrew and remove Bolt A ;
2. Slide down the Castor Yoke B and remove it;
3. Depending on the desired cutting height place
Spacers C above or below Castor Arm D .
4. When adjustment is complete, relocate Castor
Yoke B and secure it with Bolt A .
5. Repeat this procedure for the other wheel.
Roller
To adjust the height of the roller follow this procedure at both
sides of the roller:
1. Loosen Bolts B and C (Note: You do not have to remove
the bolt, half of the turn will suffice to allow movement);
2. Turn Nut D clockwise to increase the cut height or anti-
clockwise to decrease the cut height;
3. Match the height of the roller on both sides of the machine
by checking the position of Arrow A ;
4. When adjustment is complete, re-tighten Bolts B and C .
Scraper bar
In order for a scraper bar to function properly, it should
be kept tensioned. To tension the scraper bar (1)
tighten up nuts (2) at both ends of the roller (3). Locate
the scraper bar bracket (4) in a desired position by
loosening/tightening bracket nut (5).