Major SWIFT MJ71-190FM, Operator'S Manual & Parts List

Page: 18 / 89

www.major-equipment.com
14
Top Link Position
Transport Position
Before raising the machine wait until the transmission and the blades are completely still.
During the transport of the machine it is recommended that the PTO shaft is disconnected.
1. Check machine is hitched to the tractor as described. Ensure the tractor parking brake is applied
2. Ensure moving parts become still then transform the machine into transport position by hydraulic control
3. During the transport and any time the machine shall be raised, the raising device shall be adjusted to assure that the
machine is at least 250mm over the ground.
Transport Position (Winged models only)
The transport locking bars, transport pin and axle ram stopper should always be slotted into place while
transporting the machine. Doing this removes pressure from the hydraulic system. Failure to use the safety
equipment can cause mechanical as well as physical damage.
Transport Speed of Trailed models should not exceed 25 km/h.
Axle Locks
Drawbar Locks
Transport Position
Mowing Position