background image

www.major-equipment.com

1

010322

Introduction

Thank you

We appreciate having you as a customer and wish you many years of safe and satisfied use of your machine.

Safety Aspects

This manual is an important part of your machine and should remain with the machine when you buy it. Reading your 

operator’s manual will help you and others avoid personal injury or damage to the machine. Information given in this 

manual will provide the operator with the safest and most effective use of the machine. Only competent and skilled 

persons who have fully read and understood this operator’s manual are allowed to operate this machine.

Sections in your operator’s manual are placed in a specific order to help you understand all the safety messages so you 

can operate this machine safely. You can also use this manual to answer any specific operating or servicing questions. 

Your manual contains special messages to bring attention to potential safety concerns, machine damage as well 

as helpful operating and servicing information. Please read all the information carefully to avoid injury and machine 

damage. Should any questions arise regarding the information given in this booklet, please contact your local MAJOR 

dealer or MAJOR.

The operator is solely responsible for the safe use and maintenance of the machine. The machine must only be operated 

by a competent and skilled person. Setting up and adjustment must only be carried by the operator. Do not let a third 

party person to adjust or modify the machine in any way.

Intended use

This machine is a grass cutting machine and designed for cutting grass. Moreover, it must only be used with a suitable 

tractor (see “Product Specifications” section of this booklet) and driven by an adequate hydraulic pump/motor. All other 

use is strictly prohibited. Major will not be held responsible for any loss or damage caused due to a misuse of the 

machine.

Register Your Product and Warranty Online

To register your product through the Internet, simply go to the Support section on www.major-equipment.com. Completing 

the information, either online or with the product warranty card, will ensure the customer that their product receives all 

post sales service and important product information. 

This machine is warranted for 12 months. No warranty is given where the machine is being used as a hire machine. 

Warranty is against faulty workmanship or parts.

Warranty covers parts only. All parts must be returned to the manufacturer. No warranty can be considered unless parts 

are returned. All replacement parts will be supplied on a chargeable basis until warranty has been accepted.

Summary of Contents for MJ39-143





































Reviews: