Installation, Operation and Parts Manual
MJ-C10
8
PACKING, STORAGE AND TRANSPORTATION
Packing, lifting, handling, transporting operations must be performed only by experienced personnel with
appropriate knowledge of the lift and after reading this manual.
2.1 The lift was dismantled into the following 2 parts for transportation
Name
Packed by
Quantity
Lift –C10M
Steel brackets
1
Power unit –C10M
Carton
1
2.2 Storage
The packs must be kept in a covered and protected area in a temperature range 0f ‐10
℃
to +40
℃
. They must not be exposed to direct
sunlight, rain or water.
Stacking the packs
We advise against stacking because the packs are not designed for this type of storage. The narrow base, heavy weight and large size of the
packs make stacking difficult and potentially dangerous.
If stacking is unavoidable, use all appropriate precautions:
‐never stack to more than 2 meters in height.
‐never make stacks of single packs. Always stack pairs of packs in a cross pattern so that the base is bigger and the resulting stack is more
stable. Once the stack is complete, restrain it using straps, ropes or other suitable methods.
A maximum of two packs can be stacked on lorries, in containers, and in railway wagons, on condition that the packs are strapped together
and restrained to stop them falling.
2.3 Opening the packs
The packs can be lifted and transported only by using lift trucks.
Never attempt to hoist or transport the unit using lifting slings.
