www.major-equipment.com
9
PTO TUBES
MUST BE GREASED
EVERY 10 HOURS
CHECK TIGHTNESS
OF TRANSMISSION
BOLTS AFTER FIRST
8 HOURS OF WORK
Do not engage drive
while in transport
position
ATTENTION!
Machine Safety Labels
The machine safety labels shown in this section are placed in important areas on your machine to draw attention to
potential safety hazards.
On your machine safety labels, the words DANGER, WARNING, and CAUTION are used with this safety alert symbol.
DANGER identifies the most serious hazards.
To avoid injury, read the manual
Check tightness of the
transmission bolts
Rotating blade hazard
High oil
pressure
hazard
PTO entanglement
hazard - keep clear
of PTO drives.
Maximum PTO input
Grease PTO tubes
Check bolts
Grease points
Moving parts
Do not engage drive while
in transport position
