SAFETY INFORMATION
The following safety information must be observed to insure maximum
personal safety during the operation of this meter:
Ÿ
Do not use the meter if the meter or test leads look damaged, or if
you suspect that the meter is not operating properly.
Ÿ
Never ground yourself when taking electrical measurements. Do not
touch exposed metal pipes, outlets, fixtures, etc., which might be at
ground potential. Keep your body isolated from ground by using dry
clothing, rubber shoes, rubber mats, or any approved insulating
material.
Ÿ
Turn off power to the circuit under test before cutting, unsoldering,
or breaking the circuit. Small amounts of current can be dangerous.
Ÿ
Use caution when working above 60V DC or 30V AC RMS, such
voltages pose a shock hazard.
Ÿ
When using the probes, keep your fingers behind the finger guards
on the probes
Ÿ
Measuring voltage which exceeds the limits of the multimeter may
damage the meter and expose the operator to a shock hazard.
Always recognize the meter voltage limits as stated on the front of
the meter.
Ÿ
Never apply voltage or current to the meter that exceeds the
specified maximum:
Function
Maximum Input
Resistance, Capacitance, Diode test,
Continuity
Inductance
600V DC/AC
600V DC/AC
Input Limits
