11
6. Read the test value on LCD display.
7. Press
⑧
(TEST/ STOP); LCD shows the "discharging".
8. To store the data, press
⑨
(ENTER/SAVE); LCD displays the
picture shown in below.
Note:
When doing an insulation test, always connect the test leads to the
object we want to measure before pressing the TEST button.
Do not press the TEST button in advance.
7.1.3. Measure voltage (Voltage Meter) ─ Function 1
1. Press
①
(ON/OFF) button.
(Main page)
2. Press
⑥
value-add "+" or
⑦
value-reduce "-"; LCD displays
the picture shown below:
3. Press
⑨
(ENTER/SAVE) to perform measurement; LCD
displays the picture shown below:
4. Read the data measured on LCD display.
5. Press
⑩
(ESC) to return back to the former screen.
6. Then, press
⑩
(ESC) to return back to the main page.
Note:
SAVE cannot be applied during voltage measurement process.
