1. APPLICATIONS GENERAL
1)
Testing operating solenoid valves in pneumatic and
hydraulic control equipment
2) Testing relays with coils and electrically controlled
solenoid valves in all types of vehicles and machineries
3) Testing solenoid valves when servicing oil burners The
test lamp lights immediately and without metallic contact
where there is a magnetic field, e.g. an activated coil in
a solenoid valve. The test lamp responds to all kind of
magnetic fields -from alternating current to direct current
and to permanent magnets.
2. FRONT PANEL DESCRIPTION
3
1
5
4
2
6
------- Back flashlight
------- Flashlight switch ON/OFF
------- Battery cover&compartmen
------- OFF/ON test switch
------- Detector MagnetBeat
------- Self test Magnet
3
3. SPECIFICTIONS&WORK
DATA
Power
3V(AAA*2)
Magnet field(H)
63,98,401,810
Work max current
32mA
Operating temperature
–10°C to 50°C (14°F to 122°F)
Storage temperature
–10°C to 50°C (14°F to122°F)
Humidity
95%(0°C to40°C (32°F to104°F)
Altitude
3000m
Contaminated distinction
II
Weight
48g
4. OPERATING
INSTRUCTIONS
Use your know test magnet and move it to the probe,
which shall then light. If the test lamp does not light -
change the batteries.
1) First check the batteries according to the “functions
check” instructions up
2) Just touch the test object with the Magnet Tester probe.
If the lamp lights, the object is electrically actived
3) It is not necessary to unscrew the test object from its
mounting on the equipment in order to carry out the test
– a magnetic coil can even be tested through its
protection cover
4)
It is not necessary to stop the machinery or the
equipment in order to carry out the test
4
