Enclosure
Double molded
Shock (Drop Test)
2 meters (6.5 feet)
Diode Test
Test current of 1.5mA maximum, open circuit
voltage 3.2V DC typical
Continuity Check
Audible signal will sound if the resistance is less
than 25Ω (approx.), test current <0.35mA
PEAK
Captures peaks >1ms
Temperature Sensor
Requires type K thermocouple
Input Impedance
>10MΩ VDC & >9MΩ VAC
AC Response
True RMS
Li-ion Battery Charge
1. Set the function switch to the
OFF/CHG
position.
2. Insert the socket into the Meter Input port, and connect the
Adapter to the switch socket. Then Insert the Adapter into a
Power socket.
3. A charge symbol will be displayed on the TFT color LCD display.
26
Summary of Contents for MT1005
Page 1: ...MT1005 True RMS Digital Multimeter...
Page 31: ...31...
