background image

20

Majestic Fireplaces

®

 SR/SC Series

The following accessories for this appliance are available from your local Vermont Castings, Majestic Products
distributor. Should you need additional information beyond what your distributor can furnish, contact: Vermont
Castings, Majestic Products, 410 Admiral Blvd., Mississauga, Ontario, Canada L5T 2N6, Attn:  Technical Services.

CAUTION: This fireplace and chimney assembly is a highly engineered system, and, as such, must be
operated only with Vermont Castings, Majestic Products approved components.  If you use an unapproved
component to make any modifications, you may create a possible fire hazard and will void the Vermont
Castings, Majestic Products warranty.  In addition, such action may void the coverage provided by the
owner’s insurance.

Glass Door — Standard

Bi-Fold door set

Brushed Brass finish

36GDKBB (SR/C36)
42GDKBB (SR/C42)

Black finish

36GDKBK (SR/C36)
42GDKBK (SR/C42)

Polished Brass finish

36GDKDB (SR/C36)
42GDKDB (SR/C42)

Pewter finish

36GDKS (SR/SC36)
42GDKS (SR/SC42)

Fan Kit

Provides forced air flow

FK12

Variable Speed Control

Provides speed adjustment of fans

SCVS

Outside Air Termination

Completes connection from air kit to out-of-doors AK-MST

Chimney Adapter

Converts fireplace to 3-wall system

TWABR

Hearth Extension Insulation Provides hearth extension floor protection

EH2416

Grate SR/SC36/42

Holds firewood in firebox

RSBG36

Hearth Patch Compound

Patch cracks in hearth

HPC-1

Accessories

Model Number

Description

Accessory

Contact your Vermont Castings, Majestic Products distribu-
tor or dealer for finishing Marble and Mantels, available in a
wide selection of styles.

Summary of Contents for SC36

























Reviews: