3. Time display and setting
1) On the unit, Time will be displayed after slightly press the CLK button.
2) Press and hold CLK button to set the time, time on the display will be blinking.
Then slightly rotate the rotary knob to set the hour, press to confirm the hour setting, then again rotate
the rotary knob to set the minute. To confirm the time setting, simply pressing CLK button.
4. Audio Mode Selector
1) Rotate volume knob to increase/decrease the volume level.
2) Press volume knob selector, “VOL>BAS>TRE>BAL>FAD>LOUD>EQ” on the display, then rotate the
volume knob selector to increase/decrease the values.
USB / MicroSD function
The unit can play MP3 / WMA tracks from USB / MicroSD devices. During playback, the icon for the
device being played flashes.
You can go to the next / previous track by pressing the and keys. Hold down the same keys for a long
time to fast forward / backward through the track.
During playback press the "1" button to pause the track and press it again to resume playback.
Press the "2 / INT" key to listen to the first 10 seconds of each track. Press again to deactivate the function.
Press the "3 / RPT" button to activate the repeat function. The cycle is ONE (repeats the track), DIR
(repeats the entire folder), ALL (repeats all the tracks).
To activate / deactivate song playback at random press the "4 / RDM" button.
Press the "5 / -10" button to go back 10 tracks. Press and hold the same button for 3 seconds to return to
the previous folder.
Press the "6 / + 10" button to advance 10 tracks. Press and hold the same button for 3 seconds to move to
the next folder.
During song playback you can press * on the remote control followed by the number of the track to be
played to quickly switch to the selected track.
ID3 TAG
In USB / MicroSD mode, if a track containing TAG ID3 information is played, these will be automatically
shown on the display (information displayed: - Name of the track with file type, - Title, - Artist).
AUX IN
Select the "AUX" source using the "MOD" button on the device.
Connect an external audio source to the AUX IN input socket using a 3.5mm jack cable (not supplied)
and start playback on the connected external device. Adjust the volume to the desired listening level.
Installation
Assembly Instructions:
Installation
1. Push the trim plate against the chassis until it is fitted.
2. Insert the unit into the dashboard then push the unit into
the metal chassis until it is locked.
Attention:
1. Choose the mounting location where the unit will not affect
with the normal driving function of the driver.
2. Before completing the unit installation, connect the wiring
temporality and make sure it is all connected up properly and the
unit and system work properly.
Removal:
Insert the levers supplied with the unit into the grooves at both sides of the unit until they click.
Pulling the levers make it possible to remove the unit from the dashboard.