51
Majestic • DBDV36IN, DBDV36IL, DBDV42IN, DBDV42IL Installation Manual • 2397-980 Rev. B • 5/16
C. Decorative Front Dimensions for Finish-
ing
DECORATIVE
FRONT
FIT
FINISH MATERIAL
THICKNESS
SEE
FIGURE
DBM36BK
DBM42BK
Inside
Any
10.8
CRD36
CRD42
Overlap
1 inch or less
10.6
Inside
1-4 inches
10.7
Note:
Finishing strips may be used to aid in positioning of non-
combustible facing materials for some of the facing and deco-
rative front combinations speci
fi
ed in the table above. They
must be removed following
fi
nishing work. See Figure 10.7.
Figure 10.6 Overlap Fit Decorative Front - Finish Material 0-1
Inch Thick
DOOR
1 in. MAX.
FINISHING MATERIAL
(TOP EDGE)
Finishing materials 1 inch maximum thick.
Stop
fi
nishing material
fl
ush with opening.
FINISHING STRIP NOT USED
(See Figure 10.9 for
removal instructions)
NON-COMBUSTIBLE
FINISHING MATERIAL
1 IN. MAX.
CRD36, CRD42
Overlap Fit (0-1 Inch Thick Finishing Method)
Non-Combustible Finish Materials
Remove Finishing Strips. See Figure 10.9.
NOTICE:
Remove
fi
nishing strips before
fi
ring appliance.
WARNING! Risk of Burns!
A decorative front is required
for this model.
DO NOT
operate this appliance without a
decorative front in place.
Only decorative fronts certi
fi
ed for use with this appli-
ance model may be used. Contact your dealer for a list of
decorative fronts that may be used. Once you have deter-
mined what kind of decorative front and
fi
nishing material
is going to be used on the
fi
replace, you may use the
table below which shows the models and the
fi
nishing
material thickness allowed.
WARNING! Risk of Fire! DO NOT
apply
fi
nishing mate-
rial beyond the
fi
nishing strips. Appliance will overheat if
fi
nishing material extends into appliance opening.
