57
Majestic • QUARTZ32, QUARTZ36 Installation Manual • 2412-980 Rev. H • 10/16
A. Remove Fixed Glass Assembly
WARNING! Risk of Asphyxiation!
Handle
fi
xed glass
assembly with care. Inspect the gasket to ensure it is
undamaged and inspect the glass for cracks, chips or
scratches.
•
DO NOT
strike, slam or scratch glass.
•
DO NOT
operate
fi
replace with glass removed, cracked,
broken or scratched.
•
Replace as a complete assembly.
11
11
Appliance Setup
Figure 11.1 Fixed Glass Assembly
B. Remove the Shipping Materials
Remove shipping materials from inside or underneath
the
fi
rebox.
• The splatter guard is a piece of corrugated material
used to protect the appliance during the installation
process before
fi
nishing work on the whole hearth is
complete. Splatter guards may be factory-installed
or accompany the decorative front, depending on
the
fi
replace model. Splatter guards must be re-
moved before appliance is
fi
red.
WARNING! Risk of Fire!
Close the ball valve before in-
stalling the splatter guard to prevent accidental lighting.
Remove the splatter guard before lighting the appliance.
• Pull the four glass assembly latches out of the groove
on the glass frame. Remove glass assembly from the
appliance (see Figure 11.1).
GLASS
ASSEMBLY
LATCHES
(BOTH BOTTOM
AND TOP)
C. Clean the Appliance
Clean/vacuum any sawdust that may have accumulated
inside the
fi
rebox or underneath in the control cavity.
D. Setup Overview
These are common instructions for the QUARTZ32 and
QUARTZ36 models. Both size models use the same
number of components, which are scaled up or down in
size, depending on the model of
fi
replace installed.
The photos shown in these instructions depict a QUARTZ36
model.
