Majella IMPLEXUS User Manual Download | Manualshive

Page: 27 / 29

background image

The firmware of the IMPLEXUS can be updated via MIDI system exclusive (SysEx) messages. To do so, you can use ei-
ther the DIN or USB MIDI input connection, but we recommend using the USB connection.

SYSTEM EXCLUSIVE MIDI MESSAGES

To update the IMPLEXUS firmware you will need a way to send MIDI SysEx messages to the IMPLEXUS. The simplest
way is to install a MIDI utility applications on your PC and use the USB connection to send the SysEx file. There are
multiple free PC applications that can do this. We can recommend using “Snoize - SysEx Librarian”, “C6 – SysEx man-
ager” or “MIDIox – SysEx manager”, but basically any program that can be used to send large

1

SysEx files should do the

job!

PERFORMING A FIRMWARE UPDATE

The steps to perform a firmware update are as follow:

Step 1: Download the latest IMPLEXUS firmware from www.majella-audio.com

Step 2: Power on the IMPLEXUS while holding the 1/1 and 3/4 buttons of LFO 1. The IMPLEXUS should now
start up without blinking LEDs. This indicated the IMPLEXUS is ready to receive messages.

Step 3: Connect the USB cable or MIDI cable to the device (Host) sending the SysEx file.

Step 4: Send the IMPLEXUS firmware via MIDI to the IMPLEXUS. The Tap Tempo button will indicate incoming
data and the LFO division buttons will indicate the progress in steps of 10%.

Step 5: Success: When the firmware update is successfully completed the LFO buttons will do a running light
sequence.

Failed: In case the update routine failed, the Tap Tempo will blink with a constant period. In this case IMPLEXUS will go
back to the old Firmware version. You can retry the firmware update

2

starting at step 1. For extra tips, see page 54.

FIRMWARE UPDATE PROCEDURE

10%

100%

DATA

INDICATOR

MAJELLA

ENGINEERING

IMPLEX

MADE IN THE NEHTERLANDS

FIRMWARE UPDATE SUCEEDED :

MAJELLA

ENGINEERING

IMPLEX

MADE IN THE NEHTERLANDS

FIRMWARE UPDATE FAILED

MAJELLA

ENGINEERING

IMPLEX

MADE IN THE NEHTERLANDS

MAJELLA

ENGINEERING

IMPLEX

MADE IN THE NEHTERLANDS

HOLD THESE BUTTONS AT START UP:

FIRMWARE LOADING :

53

52.

«
...
25
26
27
28
29
»

Summary of Contents for IMPLEXUS






























Reviews:

No comments

Related manuals for IMPLEXUS

Brand: Soulsby Pages: 16

Brand: Viscount Pages: 42

Brand: Wurlitzer Pages: 33

Brand: Gakken Pages: 4

Brand: Roland Pages: 222

PortaTone PSR-A300

Brand: Yamaha Pages: 40

Brand: Audio Damage Pages: 9

Brand: Bleeplabs Pages: 2

Brand: Yamaha Pages: 98

Brand: Weston Precision Audio Pages: 7

Brand: Weston Precision Audio Pages: 12

Brand: Sixty Four Pixels Pages: 36

Brand: Sixty Four Pixels Pages: 40

Brand: Korg Pages: 43

Brand: Pulse Synthesizers Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands