MAJELLA
ENGINEERING
IMPLEX
MADE IN THE NEHTERLANDS
MIDI
SETTING MIDI CHANNEL
The MIDI channel of the IMPLEXUS can be set at start up. When a channel is set, the IMPLEXUS will only listen to this
particular MIDI channel. From the factory the MIDI channel is set to channel 1. If you would to set a new MIDI channel,
these are the steps to follow:
Step 1:
Set the MIDI channel of IMPLEXUS you need to power on (or restart) while holding the TAP TEMPO
button. You will notice that the IMPLEXUS does not start up with blinking LEDs like it normally does.
Step 2:
You can now select the MIDI channel from 1-10 using the LFO division buttons:
When a MIDI channel is selected the IMPLEXUS will continue its normal start up procedure. The MIDI channel
is stored in the IMPLEXUS memory, so next time you will power on the IMPLEXUS it will listen to the last selected
MIDI channel.
CONNECTING THE IMPLEXUS VIA MIDI
The IMPLEXUS can be connected via DIN or USB. When the USB cable is connected, DIN MIDI will be ignored (MIDI
THRU will still work though!). We will detail each MIDI connection option:
DIN MIDI
The IMPLEXUS can be connected to a MIDI interface/controller via the DIN MIDI
input by simply connecting a MIDI cable to the MIDI IN connector on the back of
the IMPLEXUS. The IMPLEXUS can be chained using the MIDI THRU connector. A
schematic overview of these connections can be seen in the picture below:
MAJELLA
ENGINEERING
IMPLEX
MADE IN THE NEHTERLANDS
MIDI CONTROLLER
OUT
IN
Tru
NEXT DEVICE
IN
USB
33
32.
1
6
2
7
3
8
4
9
5
10
Summary of Contents for IMPLEXUS
Page 1: ...IMPLEXUS USER MANUAL ...
Page 29: ......
